DC500

AV-PRO^™The Modules

Jumbo Unwind

Patch Applicator

Variable Feeder

Hot Melt Glue
Applicator

20.5" Wide
Spiral Folder

Sheeter Module

High Pile Delivery

Batcher Stacker

Flexo Coating
with Dryer

Web Thermographic
Unit


	*AV-PRO* ^™ DC500 DIE CUTTER


	The DC500 Die Cutter represents the state of the art in die cutter technology. The Micro Gap adjustment allows the operator to adjust cutting depth in increments of .001" with a single dial control. +1/4" lateral register and 360 degree circumferential register provide an operator friendly setup. Web direction left to right.

BASIC FEATURES:

• Web width: 20"
• Maximum material thickness: .018"
• Magnetic cylinder undercut: .023"
• Flexible die thickness: .023"
• Minimum web width: 6"
• Due cutting width: 18"
• Type of cutting: through cutting/kiss cutting
• Variable repeat: 17" - 28"
• Operating speed: Up to 500 fpm
• Roll-away design

BASIC EQUIPMENT INCLUDES:

• Anti-racking type steel spacers
• Anvil roll provided wi/anti-backlash gear
• Pin tractor loose tension Outfeed
• 22" repeat magnetic die cylinder
• ±1/8" sidelay adjustment
• 360º circumferential register on the run
• Micro-gap adjustment to allow cutting depth adjustment in .001" increments
• All non-accessible lubrication points brought out to manifold
• Follower drive motor and controls for quick disconnect
• Hardened 28" circumference anvil roll in pre-loaded tapered roller bearings

OPTIONS:

• Magnetic die cyclinders from 17" to 22" repeat (incl. bearings & blocks)
• Magnetic die cyclinders from 24" to 28" repeat (incl. bearings & blocks)
• Chip removal system for window application without blower
• High performance blower for chip/window material removal


	Technical specifications subject to change.

		View DATA SHEET for the AV-PRO DC500 TO DOWNLOAD: right-click and select "Save link (or target) as..." The DATA SHEETS are in Adobe Acrobat. You will need the Acrobat Reader to view them. You may get this Free program from Adobe. Click here to download.